Great Dane Chariot / Chariot LX GDRZ61-27KHE - Manual (Page 18)

Operating - 14
OPERATING
MX15275
• Raise and pull rearward park brake lever (A) to the lock
park brake.
Unlocking Park Brake:
MX15292
• Lower park brake lever (A) forward to unlock the park
brake.
Using the Key Switch
NOTE: Machine will only start if the following
conditions exist:
• Park brake is locked.
• PTO is disengaged.
• Motion control levers are in the neutral detent
position (standard levers) or neutral lock position
(optional “over the lap” levers).
MIF
• To turn ignition off, turn key to the STOP position (A).
• To turn ignition on, turn key to the run position (B).
• To start engine, turn key to the start position (C). Once
engine begins to run, release key back to the run position.
Using the PTO
Engage PTO:
MX15284
1. Move throttle lever (A) to the 1/2- to 3/4-throttle position.
2. Pull PTO knob (B) up to engage mower deck.
3. Move throttle lever (A) forward to the fast detent position
(C) for mowing.
Disengage PTO:
• Push PTO knob (B) down.
A
A
STOP
C
B
A
A C
B