Great Dane Chariot / Chariot LX GDRZ61-27KHE - Manual (Page 45)

Service Mower - 41
SERVICE MOWER
Service Mower
Removing and Installing Mower Deck Foot
Plate
Removing Foot Plate
1. Park machine safely. (See Parking Safely in the Safety
section.)
MX15314
2. Raise foot plate (A) using hole (B).
MX15315
3. Remove and retain hardware (C) securing foot plate (A)
on both sides of machine.
4. Remove foot plate.
Installing Foot Plate
1. Install foot plate (A) using hardware (C) saved earlier.
2. Lower foot plate.
Removing and Installing Mower Deck Belt
Shields
Removing Belt Shields
1. Park machine safely. (See Parking Safely in the Safety
section.)
2. Lower mower deck to the lowest cutting height position.
NOTE: Two retaining knobs are used on each cover on
the 72-inch mower deck.
MX15302
Picture Note: 48-, 52- and 61-inch mower deck belt
shield.
MX15303
Picture Note: 72-inch mower deck belt shield.
3. Remove knob(s) (A).
4. Remove belt shield (B).
Installing Belt Shields
1. Install belt shield (B).
2. Install knob(s) (A).
c
CAUTION: Avoid injury! Help prevent serious
personal injury. Do not operate the mower
without the foot plate installed.
B
A
A
C
c
CAUTION: Avoid injury! Help prevent serious
personal injury. Do not operate the mower
without the belt shields installed.
A
B
B
A