English, Integrated peripherals, Cpu hyper-threading – GIGABYTE 8S648FX-RZ User Manual

Page 24: Init display first, Ide1 conductor cable, Ide2 conductor cable, On-chip primary pci ide, On-chip secondary pci ide

Advertising
background image

- 24 -

8S648FX-RZ Series Motherboard

English

CPU Hyper-Threading

Enabled

Enables CPU Hyper Threading Feature. Please note that this feature is only working
for operating system with multi processors mode supported. (Default value)

Disabled

Disables CPU Hyper Threading.

Init Display First

Select the first initation of monitor or display from AGP or PCI VGA card.

AGP

Set Init display first to AGP. (Default value)

PCI

Set Init display first to PCI.

Integrated Peripherals

IDE1 Conductor Cable

Auto

Will be automatically detected by BIOS. (Default value)

ATA66/100

Set IDE1 Conductor Cable to ATA66/100 (Please make sure your IDE device
and cable is compatible with ATA66/100).

ATA33

Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device and
cable is compatible with ATA33).

IDE2 Conductor Cable

Auto Will be automatically detected by BIOS. (Default value)

ATA66/100

Set IDE2 Conductor Cable to ATA66/100 (Please make sure your IDE device
and cable is compatible with ATA66/100).

ATA33

Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device and
cable is compatible with ATA33).

On-Chip Primary PCI IDE

Enabled

Enable onboard 1st channel IDE port. (Default value)

Disabled

Disable onboard 1st channel IDE port.

On-Chip Secondary PCI IDE

Enabled

Enable onboard 2nd channel IDE port. (Default value)

Disabled

Disable onboard 2nd channel IDE port.

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

Integrated Peripherals

IDE1 Conductor Cable

[Auto]

IDE2 Conductor Cable

[Auto]

On-Chip Primary PCI IDE

[Enabled]

On-Chip Secondary PCI IDE

[Enabled]

AC97 Audio

[Enabled]

Onboard LAN device

*

[Enabled]

USB Controller

[Enabled]

USB Legacy Support

[Disabled]

Onboard Serial Port 1

[3F8/IRQ4]

Onboard Serial Port 2

[2F8/IRQ3]

Onboard Parallel Port

[378/IRQ7]

Parallel Port Mode

[SPP]

x

ECP Mode Use DMA

3

Game Port Address

[201]

Midi Port Address

[330]

Midi Port IRQ

[10]

KLJI: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F6: Fail-Save Default

F7: Optimized Defaults

Item Help

Menu Level

`

[Auto]
Auto-detect IDE
cable type

[ATA66/100/133]
Set Conductor cable

to ATA66/100/133(80
-pins)

[ATA33]
Set Conductor cable
to ATA33(40-pins)

"*" Only for 8S648FX-RZ.

Advertising
This manual is related to the following products: