GE Built-In Dishwasher - Manual (Page 2)

PARTS SUPPLIED:
■ Two #8 Phillips head wood screws, 5/8" long to Two #8 Phillips head wood screws, 5/8" long to
secure dishwasher to underside of countertop
(in literature package).
Installation Preparation
TOOLS YOU WILL NEED:
■ Phillips head screwdriver Phillips head screwdriver
■ 5/16" and 1/4" nutdriver 5/16" and 1/4" nutdriver
■ T25 torque driver (PDW__II only) T25 torque driver (PDW__II only)
■ 6" Adjustable wrench 6" Adjustable wrench
■ Level Level
■ Carpenters square Carpenters square
■ Measuring tape Measuring tape
■ Safety glasses Safety glasses
■ Flashlight Flashlight
■ Bucket to catch water when flushing the line Bucket to catch water when flushing the line
■ Gloves Gloves
For New Installations Only:
■ Tubing cutter Tubing cutter
■ Drill and appropriate bits Drill and appropriate bits
■ Hole saw set Hole saw set
MATERIALS YOU WILL NEED:
■ Ferrule, compression nut and 90° Elbow (3/8" NPT Ferrule, compression nut and 90° Elbow (3/8" NPT
external thread on one end, opposite end sized to
fit water supply)
■ Thread seal tape Thread seal tape
■ UL Listed wire nuts (3) UL Listed wire nuts (3)
Materials For New Installations Only:
■ Air gap for drain hose, if required Air gap for drain hose, if required
■ Waste tee for house plumbing, if applicable Waste tee for house plumbing, if applicable
■ Electrical cable or power cord, if applicable Electrical cable or power cord, if applicable
■ Screw type hose clamps Screw type hose clamps
■ Strain relief for electrical connection Strain relief for electrical connection
■ Hand shut-off valve Hand shut-off valve
■ Water line 3/8" min. copper Water line 3/8" min. copper
■ Coupler for extending drain line, if applicable Coupler for extending drain line, if applicable
Hose Clamps
90 ϒ Elbow
Air Gap
Carpenters Square
Coupler
Drill & Bits
Electrical Cable
Flashlight
Hand Valve
Hole Saw Bit
Level 2
Measuring Tape
Nutdriver
Safety Glasses
Screw Driver II
Tape
Tubing Cutter
Wire Nuts
2 Wood Screws
Hand
Shut-Off
Valve
90° Elbow,
Ferrule and
Compression Nut
Thread
Seal Tape
Wire Nuts (3)
Hot Water Line Electrical Cable
(or Power Cord, if applicable)
Waste Tee
Coupler Air
Gap
Screw Type
Hose Clamps
Strain Relief
Phillips
Head
Screwdriver
1/4" and
5/16" Nutdriver
Level
Carpenters
Square
T25 Torque
Driver
6" Adjustable
Wrench
Tubing Cutter
Measuring Tape Safety Glasses Flashlight
Gloves Bucket Hole Saw Set Drill and Bits
Waste Tee
Strain Relief
Hot Water Line
GLOVES Bucket
2
Crescent Wrench
Wood Screw Wood Screw