GE WA8607SCL - Manual (Page 10)

HOW TO LOAD YOUR
This illustration, with clothes just
reaching the Clothes Retaining
Ring, shows a proper load. Clothes
have ample room to move because
they are not packed down, nor
wrapped around the agitator.
Clothes
loaded dry since wet
items are likely to pack down
which encourages overloading.
This size load requires a full
water fill.
What is the best size load of
clothes—large, medium, or
small? Save time, energy and
detergent by avoiding extra use of
the washer. Try to wash
load
of clothes. If you can it is better to
save clothes until you have a full
load. you must wash smaller
save water, energy and
detergent by adjusting the water
level for the size of the load. See
Operating Instructions.
●
Load clothes dry.
●
Take a properly sorted group
clothes and drop them loosely in
the wash basket in this order:
Large items—like sheets. Do
not wrap around the agitator.
items—like
washcloths.
Medium size items—like
towels.
DO NOT OVERLOAD YOUR
WASHER.
●
Try to mix large and small items
in each machine load for better
washing action.
Wash large items (blankets, bed
spreads, mattress pads, etc.)
separately.
If machine is overloaded, you
may experience or
out of balance conditions.
To Add Items After the Washer Has Started
●
Turn off the washer by pushing in the Cycle Selector NOTE: When washing stockings, panty hose and
knob. other easily tangled items, always handle separately.
●
Add any additional articles by submerging them next
To minimize tangling, we recommend the use of a net
to the agitator.
laundry bag.
Special Recommendations for Washing Permanent Press If You Do Not Have a Dryer
If you are machine-washing permanent press clothes
●
Be careful not to overload washer. Permanent press
that you plan to line dry or drip-dry, use extra care to clothes must have ample room to move freely. A
minimize wrinkling in the wash process: medium size permanent press load is the largest
●
Remove clothes promptly as soon as washer stops
that should be washed.
hang immediately.
●
Use more water than you would for a regular load.
Use a medium water level for a small load. Use an
extra large water level for a medium load.
10