GPX 1514-0322-10 - Manual (Page 10)

GPX 10
setting the Alarm snooze and Alarm Reset
The alarm must be set at least 10 minutes
before the actual alarm time is reached in
order for the gradual light to turn on.
1. Press the Al seT button to view
the alarm time.
2. Press and hold the Al seT button.
The hour will begin to blink.
3. Press the lIGHT±/TIMe± buttons
to adjust the hour.
The PM indicator will light when the
hour is set in the PM.
4. Press the Al seT button.
The minutes will begin to blink.
5. Press the lIGHT±/TIMe± buttons
to adjust the minute.
6. Press the Al seT button.
The light will come on.
7. Press the lIGHT±/TIMe± buttons
to set the brightness of the light
when the alarm sounds.
8. Press the Al seT button.
9. Press the lIGHT±/TIMe± buttons
to switch between Al RADIo and
Al bUZZ.
10. Press the Al seT button to finish
setting the alarm.
11. Once the set alarm time is reached,
the alarm will sound.
After the alarm sounds:
Press the snooZe button to delay
the alarm for an additional 9 minutes.
OR
Press the PoWeR/Al ReseT button
to turn the alarm off until the set
alarm time is reached again.
Alarm