Gateway GTW-L17M103 User Manual
User's guide
Advertising
Table of contents
Document Outline
- Introducing YourGateway LCDTV
- Features
- Important safeguards
- Package contents
- Accessories
- Turning on your LCDTV
- To turn on your LCDTV:
- 1 Push the two release tabs and remove the cable guard from the rear of your LCDTV.
- 2 Connect the power adapter to the DCpower connector on the back of your LCDTV.
- 3 Replace the cable guard.
- 4 Plug the power cord into the power adapter, then plug other end of the power adapter into a cor...
- 5 Press the power button on the front of your LCDTV. The Status LED on the front turns green.
- 1 Push the two release tabs and remove the cable guard from the rear of your LCDTV.
- Warning
- To turn on your LCDTV:
- Front controls
- Back panel connections
- Remote control
- Connecting Components
- Warning
- Understanding video connections
- Connecting components
- Connecting a computer
- Adjusting Your LCDTV Settings
- Using the OSD
- To adjust settings from the OSD:
- 1 Press the MENU button on the remote control or the front of your LCDTV. The OSD opens.
- 2 Press the Volume or button on the remote control or the front of your LCDTV to select an OSD...
- 3 Press the MENU button on the remote control or the front of your LCDTV to open the menu you want.
- 4 Press the Channel +or– button on the remote control or the front of your LCDTV to select a ...
- 5 Press the Volume or button on the remote control or the front of your LCDTV to adjust the op...
- 6 Press the EXIT button on the remote control or the front of your LCDTV to exit the OSD.
- 1 Press the MENU button on the remote control or the front of your LCDTV. The OSD opens.
- OSD menus and options (TV,S-Video,Video1,andVideo2 mode)
- OSD menus and options (DVIandRGBvideomode)
- Setting the sleep timer
- Using parental controls
- To set the parental controls:
- 1 Press the MENU button on remote control to open the OSD.
- 2 Press the Volume and buttons on the remote control to select Other, then press the MENU butto...
- 3 Press the Volume and buttons to select the Parental Control sub-menu.
- 4 Use the number pad to enter your password when prompted. If you have not set a password, enter ...
- 5 Press the Channel– button to select the MPAA sub-menu.
- G (general audience)
- PG (parental guidance suggested)
- PG-13 (recommended for children 13 years of age and older)
- R (mature audience)
- NC-17 (no one under 17 years of age)
- Y (all children)
- Y7 (older children)
- G (general audience)
- PG (guidance suggested)
- 14 (strongly cautioned)
- FV (fantasy violence)
- D (sexual dialog)
- L (adult language)
- S (sexual situations)
- 1 Press the MENU button on remote control to open the OSD.
- To set the parental controls:
- Setting a password
- To change the security password:
- 1 Press the MENU button on remote control to open the OSD.
- 2 Press the Volume and buttons on the remote control to select Other, then press the MENU butto...
- 3 Press the Volume and buttons to select the Parental Control sub-menu.
- 4 Use the number pad to enter your password when prompted. If you have not set a password, enter ...
- 5 Press the Volume button to select the Password sub-menu.
- 6 Press the Channel +button to select Change, then use the number button pad to enter a new four...
- 1 Press the MENU button on remote control to open the OSD.
- Resetting your customized password
- To change the security password:
- To adjust settings from the OSD:
- Using the OSD
- Maintenance and Troubleshooting
- Cleaning and maintenance
- Troubleshooting
- You cannot see a picture
- You see a distorted picture or hear unusual sound
- The color is abnormal
- The picture has abnormal patterns
- The display image does not cover the entire screen
- You can see a picture but you cannot hear sound
- The monitor has pixels that are always dark
- You see “noise” or “trash” on the screen
- Screen brightness is diminished
- Telephone support
- Safety, Regulatory, and Legal Information
- Index