GIGABYTE Black Kevlar Series GP-S7500 - Manual (Page 3)

3
GP-S7500
Connecting the speak er to the woofer module
The speaker and computer all connect directly to the woofer modules.
1. Insert the connector on each speaker cable into the corresponding L or R jack labeled
on the rear of the woofer module.
2. Insert the connector on one end of the supplied 3.5mm audio input cable into the
Sound Source Jack.
Connecting the power cord
Plugging in and turning on the woofer module is the final step before using the system.
1. Plug the connector end of the power cord into an AC power outlet.
2. Turn the power switch, located on the back of the woofer module, to ON.
Controlling the system
To adjust the sound level using your speaker system controls:
For Volume - rotate the Volume control clockwise to increase or counter-clockwise to
decrease the volume.
For Bass - rotate the Bass compensation clockwise to increase or counter-clockwise
to decrease the bass.
For Treble - rotate the Treble control clockwise to increase or counter-clockwise to
decrease the treble.
AC outlet
Right
speaker
Left
speaker
Power cord
Woofer module
From Computer
Computer