GIGABYTE GA-7VA - Manual (Page 48)

- 42 - GA-7VA Motherboard
English
F F F F FACPI Suspend Type
8S1(POS) Set suspend type to Power On Suspend under ACPI OS(Power On Suspend).
(Default value)
8S3(STR) Set suspend type to Suspend To RAM under ACPI OS (Suspend To RAM).
F F F F FUSB Device Wakeup From S3
(When ACPI Suspend Type is set [S3(STR)])
USB device wakeup From S3 can be set when ACPI standby state set to S3/STR.
8Enabled USB Device can wakeup system from S3.
8Disabled USB Device can’t wakeup system from S3. (Default value)
F F F F FPower LED in S1 state
8Blinking In standby mode(S1), power LED will blink. (Default Value)
8Dual/Off In standby mode(S1):
a. If use single color LED, power LED will turn off.
b. If use dual color LED, power LED will turn to another color.
F F F F FSoft-off by PWRBTN
8Instant-off Press power button then Power off instantly. (Default value)
8Delay 4 Sec. Press power button 4 sec to Power off. Enter suspend if button is pressed less
than 4 sec.
F F F F FAC Back Function
8Memory System power on depends on the status before AC lost.
8Soft-Off Always in Off state when AC back. (Default value)
8Full-On Always power on the system when AC back.
F F F F F Keyboard Power On
This feature allows you to set the method for powering-on the system.
The option “Password“ allows you to set up to 8 alphanumeric characters to power-on the system.
The option “Keyboard 98” allows you to use the standard keyboard 98 to power on the system.
8Password Enter from 1 to 8 characters to set the Keyboard Power On Password.
8Disabled Disabled this function. (Default value)
8Keyboard 98 If your keyboard have “POWER Key” button, you can press the key to
power on your system.