GPX TL1920 - Manual (Page 10)

GPX 10
1. Press the soURCe button to switch to TV mode.
2. Press the CH lIsT button, on the remote, to view a list of
available channels.
Unless you are using a Set-Top Box, you must auto scan for
channels before being able to view channels in list view.
1. Press the soURCe button to switch to TV mode.
2. Press the CHAnnel buttons to select the desired TV channel.
3. Press the ADD/eRAse button to add or erase the current
channel as a favorite.
1. Press the soURCe button to switch to TV mode.
2. Press the FAV lIsT button to view a list of your saved favorites.
1. Press the soURCe button to switch to TV mode.
2. Press the MenU button.
3. Press the ARRoW () buttons, highlight PARENTAL, and
press the enTeR button.
4. The default passcode for the parental lock is: 0 0 0 0
5. Enter the passcode to access the PARENTAL CONTROL
preferences.
6. From this menu, you can lock specific ratings from the
United States rating system or the Canadian rating system by
accessing the V-CHIP settings. You can also lock the buttons on
the television or lock specific sources from access.
Television
Channel list View
Adding Favorites
Viewing Favorites
Parental Controls (V-Chip)
Auto scanning for Channels
The Auto Channel Scan must be run before any channels can be
viewed on the television.
1. Press the soURCe button to switch to TV mode.
2. Press the MenU button to access the setup menu.
3. Press the ARRoW () buttons to highlight the CHANNEL
icon. Press the enTeR button.
4. Press the ARRoW () buttons to highlight SIGNAL TYPE.
Press the ARRoW () buttons to select AIR.
5. Press the ARRoW () buttons to highlight AUTO CHANNEL
SEARCH. Press the enTeR button to begin scanning for
available channels.