Receiver panel descriptions – Gefen EXT-HDMI-CAT5-145 User Manual
Page 10
7
Equalization Trim Pot
1
This Trim Pot is used to equalize the incoming HDMI signal to account for
variances in CAT cable skew. By default, the Auto EQ feature is enabled and
this Trim Pot does not need to be adjusted. In the event that manual EQ mode is
enabled, this Trim Pot will be used to equalize the signal.
HDMI Output Port
2
Connect an HDMI capable display to this output port.
Power LED Indicator
3
This LED will become active once the included 5V DC power supply has been
properly connected to the 1:5 Splitter For HDMI Over CAT-5 receiver unit.
Power LED Indicator
4
Connect the included 5V DC power adapter between this input port and an
available wall power socket.
RJ-45 DDC Port
5
A CAT-5, CAT-5e or CAT-6 cable must be connected between the receiver and
sender. This cable carries DDC and HDCP data. Most source devices will not
operates properly without this data.
RJ-45 Video Port
6
A CAT-5, CAT-5e or CAT-6 cable must be connected between the receiver and
sender. This cable carries Video and Audio data.
RECEIVER PANEL DESCRIPTIONS