Grundig AMIRA26HDBLK - Manual (Page 10)

Main Menu
Press the ( ) button. The Menu including
all the setting menus will be visualized
on the screen. Navigating through the
Menu titles with the up / down movement direction
buttons
( )/( ) and pressing the up / down
direction button ( )/( ) , you may select the
menu you would like.
In the event that you wish to exit the application
at any given stage, simply press the
( ) button.
Tuning and storing the programs on
your television
You can either tune the programs
automatically or manually storing them in
your television.
Note:
If your television does not receive any
broadcast for a period of 5 minutes, it
automatically switches to the stand-by
position.
ODS is displayed on the screen.
Automatic tuning and storing in the
memory the TV channels via Autoprogram
T h e c h a n n e l s l o c a t e d v i a t h e
autoprogram (Automatic Tuning System)
f e a t u r e o f y o u r t e l e v i s i o n a r e
automatically lined up.
is done as the selected country channels
with teletext and transmitting the channel
name information ranking the first,
followed by all the channels not
transmitting the name information with
teletext and the ones without teletext
and finally the foreign channels that do
not transmit the name information in the
teletext.
Press the ( ) button. Move onto the
channel settings menu by pressing the down
movement button
( ) . When you select the
autoprogram tab by pressing the Up/down
direction
( )/( ) buttons and pres the button
( ) , the autoprogram menu will be visualized on
the screen. In the country tab, select the country
of which you would like to watch the broadcast
in priority by pressing the right/left direction
buttons
( )/( ) . Then, start the autoprogram
operation by pressing the ( ) or ( ) button.
The channels will automatically be scanned and
the channels that have broadcast shall started
to be entered into memory as of the program
that is selected on the channel settings menu.
At the same moment, the Auto-program prompt
menu will be displayed and the mark indicating
the position in which the Automatic Setting
function is found will appear. To stop the process
at any given time, please press the ( ) button.
The Program table will appear on the screen
after the automatic search is over.
You can assign any channel to any program
number you would like from among program
numbers that have been stored in the memory
as described in the part Program Table.
COUNTRY SELECTION
BELGIUM
CZECH REP.
DANMARK
DEUTSCHLAND
ELLADA
ESPAÑA
FRANCE
BACK MENU
START AUTOPROGRAMMING OK
HUNGARY
IRELAND
ITALIA
NETHERLANDS
NORGE
ÖSTERREICH
POLSKA
PORTUGAL
SCHWEIZ
SUOMI
SVERIGE
TÜRK‹YE
U. K.
. . . . .
AUTOPROGRAM
SEARCHING
S T O P MENU
2 %
ENGLISH -11-
SETUP
EXIT MENU
SYSTEM
CHANNEL
FINE TUNE
SEARCH
PROGRAM NO
STORE
AUTOPROGRAM
BG
C - -
0
P 01
SELECT