GE 24116 - Manual (Page 8)

8
Code Search
If.your.product.does.not.respond.after.you.have.tried.
all.the.codes.for.your.brand,.or.if.your.brand.is.not.
listed,.try.searching.for.your.code.by.following.these.
steps.
1.. Manually.turn.on.the.device.( TV,.DVD,.etc.).to.be.
controlled.
2.. Press.and.hold.the. SETUP.button.until.the.red.
indicator.stays.on,.then.release.the. SETUP button.
3... Press.and.quickly.release.the.desired.mode.button.
( TV,.DVD,.etc.)..The.red.indicator.blinks.off.once.
4.. Press.the. CHAN UP.button.repeatedly.(up.to.300.
times).until.the.device.to.be.controlled.changes.
channel..The.red.indicator.blinks.off.with.each.
button.press...If.you.accidentally.overshoot.the.
code.required,.press.the.
CHAN DOWN button.
to.backtrack.through.the.library.until.the.device.
changes.channel..Pressing.
CHAN UP.changes.
direction.to.forward.again..
.. Press.and.release. ENTER to.install.the.code..
Most.users.store.DVD.codes.under.the. DVD button,.
Cable.codes.under. CABLE,.etc..If.(for.example).you.
want.to.store.a.DVD.code.under. CABLE,.first.follow.
the.procedure.for.Direct.Code.Entry.(previous.page).
and.press.
CABLE in.step.2.of.Direct.Code.Entry,.then.
enter.ANY.DVD.code.in.step.3.of.Direct.Code.Entry..
Then.follow.the.steps.for.Code.Search.on.the.previ-
ous.page..
Note:..If.the.device.does.not.have.a CHAN
UP.button,.use.PLAY (DVD.only).or.ON-OFF instead..
Code.Search.starts.from.the.currently.stored.4-digit.
number.under.that.mode.