Global Machinery Company RHD1500 - Manual (Page 3)

Description of symbols
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Double insulated
for additional protection.
Conforms to relevant standards for
electromagnetic compatibility.
Specifications
Voltage: 230–240V ~ 50 Hz
Power input: 1500W
No load speed: 0 – 780 min -1
Chuck type: SDS
Keyed chuck capacity: 1.5 – 13mm
Impact frequency: 0 – 2700 BPM
Impact energy: 5.5 J
Drilling capacity:
Wood: 40mm
Steel: 13mm
Masonry: 36mm
Tool weight: 5.5kg
The sound intensity level for the operator may exceed
85dB(A) and sound protection measures are necessary
3
Introduction
Your new GMC power tool will more than satisfy your
expectations. It has been manufactured under stringent
GMC Quality Standards to meet superior performance
criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years of
dependable service.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead of
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to
the local recycling centre and disposed of
in an environmentally safe way.