Grizzly G0457 - Manual (Page 30)

-28-
g0457 14" industrial Bandsaw (Mfg. Since 5/11)
Overview
the bandsaw is one of the most versatile wood
cutting tools in the shop. it is capable of perform-
ing many different cutting functions, including:
Straight cuts
• Miters
• Angles
• Compound Angles
• resawing
• ripping
• Crosscutting
Irregular cuts
• Simple and Complex Curves
• duplicate parts
• Circles
• Beveled Curves
A properly adjusted and tuned bandsaw can be
safer to operate than most other saws and per-
forms many functions with ease and accuracy.
Basic cutting Tips
here are some basic tips to follow when oper-
ating the bandsaw:
• replace, sharpen, and clean blades as nec-
essary and make adjustments periodically to
keep the saw running in top condition.
• Use light and even pressure while cutting.
light contact with the blade will permit easier
line following and prevent undue friction.
• Avoid trying to turn tight corners because this
will twist the blade. remember, you must saw
around corners.
• Misuse of the saw or using incorrect tech-
niques is unsafe and results in frustration and
poor cuts. remember—the blade does the
cutting with the operator’s guidance.
ON/Off Switch: Starts and stops the blade
motor.
Miter Gauge Lock handle: locks the miter
gauge at the current setting.
fence Lock Lever: locks the fence at its current
position
.
figure 36. Basic controls (front).
on/oFF Switch
Fence lock lever
Miter gauge lock
handle