Setup am/fm radio aux input – GPX R600B User Manual

Page 7

Advertising
background image

7

Plug the attached AC cord into a

standard AC power outlet to power the

radio.

Requires 3, D-size, batteries (not

included)

Power

Battery Power

Tuning the AM/FM Radio

OPEN

OPEN

OPEN

OPEN

1. Turn the VOLUME dial to power

the radio on.
The POWER INDICATOR on the

front of the radio will turn red.

2. Adjust the AM/FM switch to AM or

FM radio mode.

3. Turn the TUNING dial to adjust the

AM or FM radio station.
To improve FM radio reception,

extend and adjust the TELESCOPIC

FM RADIO ANTENNA.
To improve AM radio reception,

adjust the position of the radio.

Using the Aux Input

1. Turn the VOLUME dial to power

the radio on.
The POWER INDICATOR on the

front of the radio will turn red.

2. Connect an audio source to the

AUX INPUT using a 3.5mm audio

cable (not included).

3. Use the native controls on the

connected audio source to control

the audio played through the

radio’s speaker.

Setup

AM/FM Radio

AUX Input

Advertising
This manual is related to the following products: