Gateway 600YG2 - Manual (Page 85)

80
Replacing Gateway 600YG2 Components
www.gateway.com
28
Unplug the modem cable from the modem.
29
Install the new modem into the system board and turn the board over.
Go to step
Step 33 .
30
Turn the system board over and locate the old battery.
31
Insert the small flat-blade screwdriver or non-marring tool under the old
battery and gently pry it up until it pops out of the socket.
32
Make sure the positive (+) side of the new battery is facing up, then press
the battery into the socket until it snaps into place.
33
Place the system board onto the notebook.
34
Slide the battery cover door closed.
35
Reinstall the audio board by following the instructions in “Replacing the
audio board” on page 65 .