Recording while you’re away (timer recording), Checking or clearing timer recordings – GE VG4256 User Manual
Page 25
23
Recording a Program
Timer Recording From the VCR’s Line Input
The line input refers to the signal coming from the
AUDIO1
and
VIDEO1 IN
jacks of the VCR. Recording from the line input is
convenient if you have a satellite receiver or similar component
attached to these jacks.
To timer record from the component connected to the VCRÕs line
input, press
INPUT or “0,0”
on the remote to enter
VIDEO
in the
channel number position.
Checking or Clearing Timer Recordings
1.
Press
MENU
on the remote to display the
VCR MAIN MENU
.
2.
Press
1
to display the
TIMER RECORDINGS
menu.
3.
Press
2
to display the programÕs menu.
4.
Press
MENU
for next program or
CLEAR
to erase the
program.
Recording While You’re Away (Timer Recording)
PROGRAM 1 (ONE TIME)
CHANNEL VIDEO
START TIME --:-- --
END TIME --:-- --
START DATE --/--/--
TAPE SPEED SLP
PRESS CLEAR TO CORRECT
PRESS MENU TO EXIT
VCR MAIN MENU
1 TIMER RECORDINGS
TIMER RECORDINGS
1 CREATE A NEW PROGRAM
2 REVIEW EXISTING PROGS.
PROGRAM 1 (ONE TIME)
CHANNEL 08
START TIME 02:10 PM
END TIME 03:35 PM
START DATE 08/04/96 SUN
TAPE SPEED SLP
PRESS CLEAR TO ERASE
PRESS MENU FOR NEXT PROG