Globalsat Technology Globalsat BT-328 - Manual (Page 10)

BT-328 User Manual
page 10 of 10
8. Test the BT-328 Bluetooth GPS Receiver
Please install the GPS Information program. It is included in the CD, file name could be
“GPSinfo.exe” or “GPS Information.exe”.
This testing program only supports the Microsoft Windows CE & Pocket PC based PDA
platform. Please refer to the GPSinfo User Manual for more detailed guide.
9. Troubleshooting
Bluetooth is unable to connect
(1) Check if the Bluetooth status LED is flashing normally.
(2) Check if the battery power is enough. If not, please recharge it.
(3) Check if the other Bluetooth device is enabled or not.
GPS cannot be positioned
(1) Check if the GPS status LED is flashing normally.
(2) Check if the battery power is enough. If not, please recharge it.
(3) If GPS cannot be positioned for long, apply GPSinfo software to make it a Cold Start,
and move it to an open space for performing the positioning task.
FCC Notices
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may
cause undesired operation .