GE A Series : A1255 - Manual (Page 44)

40 41 40 41
Blink Detection
The Blink Detection feature is on by default, and after taking
each photo, a warning message will pop up if a blink had been
detected in the photo.
1. In any Still Shooting modes, press the
button to enter
the photo menu.
2. Switch between different Photo Setup menus and Camera
Setup menus using the Left/Right button, and select the
“Blink Detection” setting using the Up/Down button.
3. Use the Right navigation buttons to enter the submenu,
and select "On" option.
4. Press the button to confirm the setting and exit the
menu.
5. The "Blink detection" indicator appears on the LCD.
6. Press the Shutter button fully to capture the image. If
someone has blinked, the camera will show blink detection
warning message right after.
A face must be detected by the camera in order for
smile detection to function correctly.
For optimal detection results, the subject should be
framed to occupy most of the screen space.