GE DV-354 - Manual (Page 13)

(Connecting Up
connections
The setup here is a basic setup
that allows you to play discs the
cables supplied the player. In this setup,
stereo audio IS played through the speakers
your
Important
l
This player is equipped with copy
protection technology. Do not connect
this player to your TV a VCR (or your
VCR via this player) AV cables, as
the picture from this player will not
appear properly on your TV. (This player
may also not be compatible with some
TV/VCRs for the same
reason; refer to the manufacturer for
more information,)
1 Connect the VIDEO OUT and AUDIO
OUT jacks to a set of A/V inputs on your
TV.
Use the supplied audio/video cable, connect-
ing the red and white plugs to the audio
outputs and the yellow plug to the video
output. Make sure you match up the left and
right audio outputs with their corresponding
inputs for correct stereo sound.
See below if you want to or
component video cables for the video
connection.
2 Connect the supplied AC power cord
to the AC IN inlet, then plug into a power
outlet.
E n