Microsd™ card use (optional), Microsd, Card use (optional) – Garmin aera 500 User Manual

Page 142: Installing and removing mircosd, Cards, Appendix c, The aera uses an optional microsd, Card for storing data

Advertising
background image

Garmin aera 500 Series Pilot’s Guide

190-01117-02 Rev. A

appendix c

130

Overview

GPS Navigation

Flight Planning

Hazar

d

Avoidance

Additional F

eatur

es

Appendices

Index

MicroSd

card uSe (OPtiONal)

The aera uses an optional MicroSD

Card for storing data.

INSTAllING ANd REmOVING mircoSd

CARdS

Install the MicroSD Card in the slot located under the battery. Install or remove the

MicroSD Card at any time, whether the unit is on or off.

You can load a variety of information to the aera internal memory or MicroSD Card,

such as MapSource detailed maps in a MapSource program.

aera microSd Card Slot

Release Key: Slide and

Release to Open the Battery

Cover

MicroSD™ Slot

Installing an microSd Card:

1) Slide the 'Release Key' to the right to release the battery cover. The

'Release Key' is located on the bottom right side of the unit.

2) Remove the battery to access the MicroSD card slot.
3) Firmly push the card into the unit. It is not necessary to force the card. The

handle is still exposed when it is properly inserted.

4) The unit takes a few seconds to read the card. When the data card has

been properly installed and accepted, a summary screen noting the card
details appears. Touch to acknowledge.

Advertising
This manual is related to the following products: