Grizzly G3183 - Manual (Page 9)

G3183 Hollow Chisel Mortiser -7-
SECTION 2: ASSEMBLY
Hydraulic Cylinder
To install the Hydraulic Cylinder:
1. Screw the handle bar into the adjustable gear
on the right side of the mortising machine and
raise the head to its highest position.
Figure 1.
Figure 1.
Figure 2.
2. With the head fully extended above the mortis-
er’s base, snap the hydraulic cylinder into the
fittings located on the right side of the head
and at the base of the column.
Figure 2.