7 receiver panel descriptions, Receiver panel descriptions – Gefen USB 2.0 LR Extender EXT-USB2.0-LR User Manual
Page 11
7
1 Power LED Indicator
This LED will become active once a valid connection is made between the
included 5V DC power supply and an open wall power socket.
2 Host Connection LED Indicator
This LED will become active once a valid connection is made by the host source
and the USB 2.0 LR Extender.
3 USB “A” Input Connector 1
Connect the USB device to this input.
4 USB “A” Input Connector 2
Connect the USB device to this input.
5 Link LED Indicator
This LED will become active once a valid connection is between the sender and
receiver units.
6 RJ-45 Connection Port
Connect a CAT-5, CAT-5e or CAT-6 cable between this port and the RJ45
connection port on the sending unit.
7 Activity LED Indicator
This LED will be active when traffic is passing between the sending and
receiving units.
8 5V DC Locking Power Receptacle
Connect the included locking 5V DC power supply between this port and an
open wall power socket.
RECEIVER PANEL DESCRIPTIONS