GE HVM1540 - Manual (Page 33)

Light Bulb Replacement
1 To replace the bulb(s),
first disconnect the power
at the main fuse or circuit
breaker panel or pull
the plug.
2 Remove the screw from
light cover and lower
the cover.
3 Be sure the bulb(s) to be
replaced are cool before
removing. After breaking
the adhesive seal, remove
the bulb by gently turning.
4 Replace the screw.
Connect electrical power
to the oven.
Replace the burned-out
bulb with a 30- or 40-
watt incandescent bulb
(30-watt—WB36X10198/
40-watt—WB36X10003),
available from your
GE supplier.
Cooktop Light/
Night Light
1 To replace the oven light,
first disconnect the power
at the main fuse or circuit
breaker panel or pull
the plug.
2 Remove the top grille by
taking out the 4 screws
that hold it in place.
3 Push tab back and lift
light housing. Replace
the bulb and press the
light housing back into
place.
4 Replace the top grille
and 4 screws. Connect
electrical power to
the oven.
Replace the burned-out
bulb with a 30- or 40-
watt incandescent bulb
(30-watt—WB36X10198/
40-watt—WB36X10003),
available from your
GE supplier.
Oven Light
33
REMOVE SCREW
REMOVE SCREWS