Global Machinery Company MXR56 User Manual
Page 3
3
Description of symbols
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Double insulated
for additional protection.
Conforms to relevant standards for
electromagnetic compatibility.
Specifications
Voltage:
230–240 Vac ~ 50 Hz
Input power:
850W
No load speed:
300–2700 min
-1
Blade stroke:
30mm
Cutting capacity:
Wood
115mm
Steel tube, plastic, aluminium alloy
90mm
Weight:
3.5kg
Sound pressure level:
88.7 dB(A)
Common blade types (blades not supplied):
150mm long, 6 TPI
For fast smooth cuts in
woods, masonite, plastics,
hard composite board and all
plunge cutting. Keyhole blade
shape permits cutting in hard
to reach places.
230mm long, 6 TPI
For fast, smooth, deep cuts
through thick wood, plastic,
composition board and
hardboard.
300mm long, 6 TPI
For rough cuts in wood.
100mm long, 24 TPI
High speed steel blade for
cutting ferrous materials.
Dear Customer
If you require any help with your product, whether it is a
Warranty claim, spare part or user information:
Please phone our Help Line for an immediate response. The
appropriate number is given on the rear page of this manual.
Introduction
Your new GMC power tool will more than satisfy your
expectations. It has been manufactured under stringent
GMC Quality Standards to meet superior performance
criteria.
You will find your new tool easy and safe to operate, and,
with proper care, it will give you many years of dependable
service.
CAUTION.
Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make you
job faster and easier. Safety performance and dependability
have been given top priority to the development of this tool,
making it easy to maintain and operate.
Environmental protection
Recycle unwanted materials instead of
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to the
local recycling centre and disposed of in an
environmentally safe way.