Gembird CAM77IP - Manual (Page 32)

IP camera
Step 5. Click Submit to confirm and save settings.
Step 6. The file will start to upload; on a 100Mbps Network it should takes around 7~10
second.
Step 7. System will automatically start counting down 50 second. If successful, the
following should appear on screen "Update completed! System will auto reset after 3
seconds!".
Step 8. System will redirect to System Login page, re-enter Account ID and Password to
login.
Step 9. Check and to validate if Current Version is the most updated.
Caution: After Step 6, DO NOT disconnects IPCAM from its power source, or else may
cause damage to IPCAM that required factory repair.