Grizzly G1019Z - Manual (Page 10)

-8- Model G1019Z 14" Bandsaw
Unpacking
The Model G1019Z Bandsaw is shipped from the
manufacturer in a carefully packed carton. If you
discover the machine is damaged after you’ve
signed for delivery,
please call Customer Service
immediately for advice.
Save the containers and all packing materials for
possible inspection by the carrier or their agent.
Otherwise filing a freight claim can be difficult.
Piece Inventory
Hardware Bag #1 Qty
Rubber Feet 4
Table Insert 1
Table Trunnion Knobs 2
Fender Washers 1 ⁄
4
" 3
Lock Washers 5 ⁄
16
" 3
Cap Screws 1 ⁄
4
" - 20 x 1" 3
Key 5 x 5 x 25mm 1
Nut 3 ⁄
8
" - 16 1
Bolt 3 ⁄
8
" - 16 x 2 1 ⁄
2
" 1
Setscrew 1 ⁄
4
" - 20 x 1 ⁄
4
" 1
Roll Pin 3 x 10mm 1
Allen ® Wrench 3mm 1
Allen ® Wrench 5mm 1
Hardware Bag #2 Qty
Cap Screws 1 ⁄
4
" - 28 x 1 1 ⁄
8
" 2
Fence Spacers 2
Carriage Bolts 5 ⁄
16
" - 18 x 3 ⁄
4
" 32
Nuts 5 ⁄
16
" - 18 32
Nuts 3 ⁄
8
" - 16 4
Flat Washers 3 ⁄
8
" 8
Flat Washers 5 ⁄
16
" 32
Bolts 3 ⁄
8
" - 16 x 1" 4
In the event that any parts are missing, we will be
happy to replace them. Contact our Customer
Service number for assistance. If any non-propri-
etary parts such as nuts, bolts or washers are
missing, we will be happy to replace these too, but
for the sake of expediency, these items can be
obtained at your local hardware store.
After all the parts have been removed from the
carton, you should have:
• Stand Assembly
4 Stand Legs
1 Stand Top
2 Upper Stand Braces
2 Lower Stand Braces (Short)
2 Lower Stand Braces (Long)
• Motor
• Motor Pulley
• Bandsaw Unit
• Table
• Table Bracket
• Fence
• Fence Rail
• Fence Lock Knob
• Miter Gauge
When you are completely satisfied with the condi-
tion of your shipment, you should inventory its
parts.
The Model G1019Z is a
heavy machine (165
lbs. shipping weight).
DO NOT over-exert
yourself while unpack-
ing or moving your
machine—get assis-
tance.