GIGABYTE GA-8I865GME-775-RH - Manual (Page 33)

BIOS Setup - 33 -
English
CPU Hyper-Threading (Note)
Enabled Enable CPU Hyper Threading Feature. Please note that this feature is only
working for operating system with multi processors mode supported.
(Default value)
Disabled Disable CPU Hyper Threading.
Limit CPUID Max. to 3 (Note)
Enabled Limit CPUID Maximum value to 3 when use older OS like NT4.
Disabled Disable CPUID Limit for windows XP. (Default value)
No-Execute Memory Protect (Note)
Enabled Enable No-Execute Memory Protect function.(Default value)
Disabled Disable No-Execute Memory Protect function.
CPU Enhanced Halt (C1E) (Note)
Enabled Enable CPU Enhanced Halt (C1E) function.(Default value)
Disabled Disable CPU Enhanced Halt (C1E) function.
CPU Thermal Monitor 2 (TM2) (Note)
Enabled Enable CPU Thermal Monitor 2 (TM2) function.(Default value)
Disabled Disable CPU Thermal Monitor 2 (TM2) function.
CPU EIST Function (Note)
Enabled Enable CPU EIST function.(Default value)
Disabled Disable CPU EIST function.
Virtualization Technology (Note)
Enabled Enable Virtualization Technology function. (Default value)
Disabled Disable Virtualization Technology function.
Init Display First
Select the first initiation of the monitor display from onboard/AGP or PCI VGA card.
PCI Set Init Display First to PCI VGA card. (Default value)
Onboard/AGP Set Init Display First to onboard/AGP VGA card.
On-Chip Frame Buffer Size
1MB Set on-chip frame buffer size to 1 MB.
4MB Set on-chip frame buffer size to 4 MB.
8MB Set on-chip frame buffer size to 8 MB.
16MB Set on-chip frame buffer size to 16 MB. (Default value)
32MB Set on-chip frame buffer size to 32 MB.
(Note) This item will show up when you install a processor that supports this function.