GIGABYTE GA-K8NS ULTRA-939 - Manual (Page 65)

Technical Reference - 65 -
English
Use the back audio panel to connect the audio output
without any additional module.
STEP 1 :
Connect the front channels to "Line Out",the rear
channels to "Line In", and the Center/Subwoofer chan-
nels to "MIC In".
6 Channel Analog Audio Output Mode
STEP 2 :
Following installation of the audio driver, you find a
icon a Sound Effect icon on the lower right hand
taskbar. Click the icon to select the function.
STEP 3 :
Click "Speaker Configuration" and select the "UAJ
Function". Then click on the left selection bar and
select "6CH Speaker" to complete 6 channel audio
configuration.
Line Out
Line In
MIC In