GE 21015 User Manual
Page 21
21
C
HARGE
/P
AGE
I
NDICATOR
When the charge indicator is lit, the handset is correctly seated in the
cradle and is charging. The indicator flashes when the base is paged, when
the base pages the handset, or when you receive an incoming call.
M
AKING
C
ALLS
WITH
THE
H
ANDSET
1. Pick up the handset and press the talk/callback button. Listen for a dial tone.
2. Dial the desired number, or dial the number first, and then press the
talk/callback button.
3. When finished, press the talk/callback button again and hang up
the handset.
M
AKING
C
ALLS
WITH
THE
S
PEAKERPHONE
1. Press the callback/speaker button on the base. You will hear a dial tone.
2. Dial the number you want to call. Or, dial the number first and then
press the speaker/callback button.
3. When finished, press the callback/speaker button to hang up.
A
NSWERING
C
ALLS
WITH
THE
H
ANDSET
1. When the phone rings, pick up the handset, and press the talk/
callback button.
2. When finished, press the talk/callback button again and hang up
the handset.
A
NSWERING
C
ALLS
WITH
THE
S
PEAKERPHONE
1. When the phone rings, press the speaker/callback button.
2. When finished, press callback/speaker to hang up.
NOTE:
If you are using the handset and want to switch to the speakerphone, press
the callback/speaker button on the base. The speakerphone indicator turns on. To
switch off the handset, press the talk/callback button on the handset.
C
ALL
T
IMER
When you press talk/callback on the handset or speaker/callback on the
base, the built-in call timer shows in the display and counts the length of
time of the call in minutes and seconds.