Warnings, Warning – Graco Inc. 12004X User Manual

Page 3

Advertising
background image

Warnings

309739

3

Warnings

Warning

E

LECTRIC

S

HOCK

H

AZARD

Improper grounding, setup, or usage of the system can cause electric shock.
•

Turn off and disconnect power at main switch before disconnecting any cables and before servicing
equipment.

•

All electrical wiring must be done by a qualified electrician and comply with all local codes and regu-
lations.

•

Connect only to grounded power source.

S

KIN

I

NJECTION

H

AZARD

High pressure fluid from gun, hose leaks, or ruptured components will pierce skin. This may look like just
a cut, but it is a serious injury that can result in amputation. Get immediate surgical treatment.
•

Do not point gun at anyone or at any part of the body.

•

Do not put your hand over the spray tip.

•

Do not stop or deflect leaks with your hand, body, glove, or rag.

•

Engage trigger lock when not spraying.

•

Follow Pressure Relief Procedure on page 5 if the nozzle clogs and before cleaning, checking or
servicing equipment.

T

OXIC

F

LUID

H

AZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on the skin, inhaled, or
swallowed.
•

Read MSDS’s to know the specific hazards of the fluids you are using.

•

Store hazardous fluid in approved containers and dispose of it according to applicable guidelines.

E

QUIPMENT

M

ISUSE

H

AZARD

Equipment misuse can cause death or serious injury.
•

Do not exceed maximum working pressure or temperature rating of lowest rated system component.
See Technical Data in all equipment manuals.

•

Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all
equipment manuals. Read fluid and solvent manufacturers warnings.

•

Check equipment daily. Repair or replace worn or damaged parts immediately.

•

Do not alter or modify equipment.

•

For professional use only.

•

Use equipment only for its intended purpose. Call your Graco distributor for information.

•

Route hoses away from traffic areas, sharp edges, moving parts and hot surfaces.

•

Do not use hoses to pull equipment.

Advertising
This manual is related to the following products: