Grizzly T23091 - Manual (Page 6)

Model t23091 1 ⁄
4
" Air die grinder -4 -
section 1: introduction
We are proud to offer this manual with your
new t23091! We've made every effort to
be exact with the instructions, specifica-
tions, drawings, and photographs of the
t23091 we used when writing this manual.
however, sometimes we still make an
occasional mistake.
Also, owing to our policy of continuous
improvement, your t23091 may not exact-
ly match the manual. if you find this to be
the case, and the difference between the
manual and t23091 leaves you in doubt,
check our website for the latest manual
update or call technical support for help.
For your convenience, we post all avail-
able manuals and manual updates for
free on our website at www.grizzly.com.
Any updates to your model of tool will be
reflected in these documents as soon as
they are complete.
foreword
tool Bit shank size............ ................................................................................................ 1 ⁄
4
"
Free speed............ ............................................................................................. 22,000 rpM
Average Air Consumption ........................................................................................... 4 CFM
operating Air pressure ................................................................................................ 90 psi
Maximum Air pressure .............................................................................................. 100 psi
Air inlet size ...............................................................................................................
1 ⁄
4
" npt
Minimum Air hose inside diameter .................................................................................... 3 ⁄
8
"
Weighted sound pressure Level ........................................................................... 82.8 dB(A)
sound power Level ............................................................................................... 93.8 dB(A)
handle Vibration rating ............................................................................................0.9 m/s
2
net Weight ..................................................................................................................1.42 lbs
shipping Weight .........................................................................................................1.68 lbs
specifications
contact info
We stand behind our products. if you have
any service questions, parts requests
or general questions about the product,
please call or write us at the location listed
below.
grizzly industrial, inc.
1203 Lycoming Mall Circle
Muncy, pA 17756
phone: (570) 546-9663
e-Mail: [email protected]
We want your feedback on this manual.
if you can take the time, please email or
write to us at the address below and tell
us how we did:
grizzly industrial, inc.
C/o technical documentation Manager
p.o. Box 2069
Bellingham, WA 98227-2069
email: [email protected]