Gemini Industries 1SLC805002F0001 - Manual (Page 10)

10 ABB
2
1SLC805009F0001
1SLC805016F0001
1SLC805020F0001
1SLC805015F0001
1SLC805017F0001
1SLC805018F0001
1SLC805021F0001
The fixing hooks and feet supplied in
the standard versions are applied
without having to use tools, making it
possible to install the base plate at
seven different depths inside the
switchboard. They can also be
adjusted at three further positions.
Application of the inner door
guarantees IP40 degree of protection
when the switchboard door is open.
The base plate can be snap-mounted
inside the switchboard.
Gemini switchboards are de-
signed to be perfectly compa-
tible with ABB components for
low voltage control and moni-
toring.
For these applications they can
be equipped with modular de-
vices belonging to the System
pro M range, with Tmax
moulded-case circuit-breakers
and control and signaling de-
vices, creating a truly integrated
automation system.
When deciding the Gemini lay-
out for control and monitoring
applications, not only is it pos-
sible to select the box and door
in the required size, but you can
also select the base plate in one
of the three versions in the
range.
After wiring with the ducts and
the Fix-O-Rapid device, the
special standard adjustable feet
and hooks must be fitted onto
the base plate, allowing it to be
inserted inside the box at up to
seven different depths and
three further levels of adjust-
ment: no tools need to be used
to carry out these operations.
To finish the job, the inner door
can be mounted (reversible and
in insulating material), guaran-
teeing IP40 degree of protection
when the switchboard door is
open.
No tools are needed unless the
inner door is equipped with but-
tons, warning lights, etc.
Example of the configuration of a
switchboard for an automation
application: some ABB control and
protection devices are installed on the
plate. The inner door is fitted with
light-signaling devices.
Order codes
Components for automation applications