Connections and setup, Dvd player + tv + vcr + satellite receiver, Chapter 1 – GE GE1101P User Manual
Page 17
chapter 1 _______________________________________________________________ 15
Connections and Setup
DVD Player + TV + VCR + Satellite Receiver
1.
Connect the audio cables to the AUDIO OUT L (left – white) and R (right – red) jacks on the
back of your DVD Player, and to the corresponding Audio Input jacks on your TV.
2.
Connect the video cable.
• Basic video connection – Connect the video cable (yellow) to the VIDEO OUT jack on the
back of your DVD Player, and to the Video Input jack on your TV.
OR
• S-Video (optional) – If your TV has an S-Video Input jack, connect the S-Video cable to the
S-VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If
your TV doesn’t have S-Video, use the basic video connection listed above.
3.
Connect a coaxial cable to the antenna output jack on the VCR and to the Antenna Input jack
on the television.
4.
Use a coaxial cable to connect the antenna output on the satellite receiver to the antenna
input on the VCR.
5.
Plug the power cord into an AC outlet.
Go to page 19