GENIUS GEO -1 - Manual (Page 9)

To show a graphic signal strength indicator:
• Press the ‘select’ button at any time when tuned into a station. The empty
block indicates the minimum required level for good reception and the filled
blocks show the current level.
• If required move the antenna around until the filled blocks move past the
empty block.
6 Menu Options
To select a menu option press the ‘MENU’ button then scroll through the
options using the ‘LEFT/RIGHT ARROW buttons. When you have found the
menu option you require press ‘SELECT’.
The menus options are as follows:
6.1 Station Order
By selecting the ‘Station Order’ option you can change the order in which your
stations appear on the station order list. Choose one of the below options then
press SELECT
• Alphanumeric – all stations are sorted alphabetically (default)
• Active Stations – all stations that are active will appear at the top of the list
and all inactive stations at the bottom of the station list. Inactive stations are
the stations that appear with a ‘?’ next to them
• Favourite Stations – this displays your ten favourite (most listened to)
stations at the top of the list and the rest below in alphanumeric order. Your
favourite stations are those that appear with a ‘<’ next to them
• Prune Stations – if you move a DAB radio to a different location, certain
stations on your station list may no longer be available however these will
continue to appear on your station list as ‘inactive’ stations and will appear
with a question mark ‘?’ next to them. These stations can be deleted by
selecting the ‘Prune Stations’ option
Scroll through this list using the LEFT/RIGHT ARROW buttons and then press
SELECT to choose your preferred option
Page 9/14