GE 840074400 - Manual (Page 7)

7
The S-blade can be used
to coarsely chop, finely mince,
mix, or puree food
to a smooth consistency.
1. Make sure the Control Switch is
turned OFF and the unit is
unplugged.
2. Lock the bowl onto base. (See “How
to Lock the Bowl” on page 5.)
3. Place the S-blade onto motor shaft
of food processor in center of bowl.
Turn slowly until blade drops into
place. Handle carefully; the blade
is sharp.
4. Lock cover onto bowl. (See “How to
Lock the Cover” on page 5.) Insert
food pusher into food chute.
5. Pull all of cord out of cord storage.
This will help air flow and keep the
motor cool. Plug in unit and process
food. The processing speed and time
will determine the finished consisten-
cy of the food. The Pulse button can
help you avoid overprocessing.
S-Blade
Motor Shaft
How to Operate the Controls
The controls are conveniently located
on top of the base. Rotate the center
knob to select a Low, Medium, or High
variable speed. If the bowl and cover are
properly locked the Ready light should
be on.
On/Off
Speed
Dial
Pulse
Processing with the S-Blade
840074400 Ev08.qxd 3.5.01 14:22 Page 7