Gefen GTV-DIGAUD-2-AAUD - Manual (Page 9)

5
1 Power Indicator
This LED indicator will glow bright red once the included 5V DC power
supply has been connected between the Digital Audio to Analog Adapter
and an available electrical outlet.
2 Out L
Connect an RCA cable from this port to the left channel input of the A/V
device.
3 Out R
Connect an RCA cable from this port to the right channel input of the A/V
device.
4 In Coax
Connect a coax cable from the digital audio source to this S/PDIF port.
5 Optical
Connect an optical cable from the digital audio source to this
TOSLINK™ port.
6 Optical / Coax
Use this slider switch to select between the Optical input or the Coax
input on the Digital Audio to Analog Adapter.
7 DC 5V
Connect the included power supply to this power receptacle.
PANEL DESCRIPTIONS