Buttons: signal light & sounds – Gemini Industries Gemtek PT300 User Manual
Page 9
5
Buttons: Signal Light & Sounds
������������
������������������������
������������
������������
����������
��������������
�����
���������������
�������������
�������
������������
�������
�����������
��������������
N
ot
e
• Geofence and SOS Buttons MUST be held for at least 4 seconds, other
buttons press for 2 seconds.
B
UTTON
L
IGHT
S
OUND
Answer Button
Green light with 1 blink
1 beep
Geofence Button—press
and hold for at least 4 sec-
onds
Green light with 1 blink
1 beep
(activating)
Green light with 1 blink
2 beeps
(deactivating)
Hang-up Button
Green light with 1 blink
1 beep
Speed Dial 1
Green light with 1 blink
1 beep
Speed Dial 2
Green light with 1 blink
1 beep
Speed Dial 3
Gemini Customer Service
Green light with 1 blink
1 beep
Volume
No light on signal
1 beep
Test
Green light stays on for 3 seconds if cell phone signal is
OK (no green lights if no cell phone signal)
Blue light stays on for 4 seconds if GPS signal is OK (If no
GPS signal, then signal light blinks blue for 20 seconds)
2 beeps
SOS Button—press and hold
for at least 4 seconds
Green light stays on until SMS sending
is completed or SOS status is over
No Sound
User Manual.indd 5
2/2/06 10:27:48 AM