GIGABYTE AMD Socket 754 Processor Motherboard GA-K8VT800-RH - Manual (Page 22)

GA-K8VT800-RH Motherboard - 22 -
English
9) F_PANEL (Front Panel Jumper)
Please connect the power LED, PC speaker, reset switch and power switch etc of your chassis
front panel to the F_PANEL connector according to the pin assignment below.
SPK- SPK+
20
Speaker
Connector
19
IDE Hard Disk
Active LED
Reset Switch
2
Soft Power
Connector
MSG+
MSG-
Message LED/Power/
Sleep LED
PW-
PW+
1
HD+
HD-
RST+
RST-
NC
HD (IDE Hard Disk Active LED) Pin 1: LED anode(+)
(Blue) Pin 2: LED cathode(-)
SPEAK (Speaker Connector) Pin 1: Power
(Amber) Pin 2- Pin 3: NC
Pin 4: Data(-)
RES (Reset Switch) Open: Normal
(Green) Close: Reset Hardware System
PW (Power Switch) Open: Normal
(Red) Close: Power On/Off
MSG(Message LED/Power/Sleep LED) Pin 1: LED anode(+)
(Yellow) Pin 2: LED cathode(-)
NC (Purple) NC