GE WBSR1060 - Manual (Page 10)

Problem Possible Causes What To Do
Pilling Result of normal wear on • While this is not caused by the washer, you
poly-cotton blends and can slow the pilling process by washing
fuzzy fabrics garments inside out.
Grayed or yellowed Not enough detergent • Use more detergent (especially with larger loads).
clothes
Hard water • Use a water conditioner like Calgon brand or install
a water softener.
Water is not hot enough • Make sure water heater is delivering water at
120°F.–140°F. (48°C.–60°C.).
Washer is overloaded • Select load size to match clothes load.
Detergent is not • Add detergent as wash basket fills with water before
dissolving you load clothes.
Dye transfer • Sort clothes by color. If fabric label states wash
separately,
unstable dyes may be indicated.
Before you call for service…
10
Operating Instructions
Safety Instructions
Customer Service
Troubleshooting T
ips