Control panel, Oven door – GE Monogram ZEK938 – 27 ″ Single Wall Oven User Manual

Page 39

Advertising
background image

Control
panel

It’s a good idea to wipe the control panel after
each use. Clean with mild soap and water or
vinegar and water, rinse with clean water and
polish dry with a soft cloth.

Do not use abrasive cleansers, strong liquid
cleaners, plastic scouring pads or oven cleaners
on the control panel—they will damage the
finish. A 50/50 solution of vinegar and hot
water works well.

Do not rub or clean the door gasket—

it has an extremely low resistance to abrasion.

If you notice the gasket becoming worn, frayed or damaged in any way or

if it has become displaced on the door, you should have it replaced.

To clean the inside of the door:
• Because the area inside the gasket is cleaned

during the self-clean cycle, you do not need to
clean this by hand.

• The area outside the gasket and the door liner

can be cleaned with a soap-filled or plastic
scouring pad, hot water and detergent. Rinse well
with a vinegar and water solution.

To clean the outside of the door:
• Use soap and water to thoroughly clean the top,

sides and front of the oven door. Rinse well. You
may also use a glass cleaner to clean the glass
on the outside of the door. Do not let water drip
into the vent openings.

• If any stain on the door vent trim is persistent,

use a soft abrasive cleaner and a sponge-scrubber
for best results.

• Spillage of marinades, fruit juices, tomato

sauces and basting materials containing acids
may cause discoloration and should be wiped
up immediately. When surface is cool, clean
and rinse.

• Do not use oven cleaners, cleaning powders

or harsh abrasives on the outside of the door.

Oven door

39

Advertising