Graco 4460402 - Manual (Page 11)

11
2.3 Removing and Attaching Base
2.4 Adjusting Handle
To remove infant restraint, squeeze handle at
back of seat and lift infant restraint from base
as shown
‹
.
To put infant restraint in base, push infant
restraint down until it clicks into base. Pull
up on infant restraint to be sure it is
latched firmly into base.
‹
1. Press handle adjustment buttons on
both sides of handle
Œ
.
2. Rotate handle until it clicks into any
of three positions (for carrying,
reclining, or sitting). BOTH handle
adjustment buttons must pop out
to lock handle in place

.
3. Push and pull on the handle to be
sure it is locked firmly in position.
Œ

Carrying
Reclining
Sitting