Global Machinery Company LS LINE/REDEYE - Manual (Page 4)

Safety rules for laser line generators
The laser line generator is Class 2 with maximum 1mW and
400nm – 650nm wavelengths. These lasers do not normally
present an optical hazard, although staring at the beam
may cause flash blindness.
WARNING. Do not stare directly at the laser beam.
A hazard may exist if you deliberately stare into the beam,
please observe all safety rules as follows;
• The laser shall be used and maintained in accordance with
the manufacturer’s instructions.
• Never aim the beam at any person or an object other than
the work piece.
• The laser beam shall not be deliberately aimed at
personnel and shall be prevented from being directed
towards the eye of a person for longer than 0.25s.
• Always ensure the laser beam is aimed at a sturdy work
piece without reflective surfaces. i.e. wood or rough
coated surfaces are acceptable. Bright shiny reflective
sheet steel or the like is not suitable for laser use as
the reflective surface could direct the beam back at the
operator.
• Do not change the laser light assembly with a
different type. Repairs must be carried out by the laser
manufacturer or an authorized agent.
CAUTION. Use of controls, adjustments
or performance of procedures other than
those specified herein may result in
hazardous radiation exposure.
Please refer to the relevant Australian
standards, AS 2397 and AS/NZS2211
for more information on Lasers.
Additional safety rules for laser
line generator
The laser line generator emits a laser fan beam, which acts
like an invisible surface in the actual three dimensions
space. When used indoors, it generates a visible laser line
on the surfaces the laser fan beam crosses.
The liner is a Class 2 laser tool and is manufactured to
Australian standards, AS 2397 and AS/NZS2211.
The two vials on the top of the laser line generator are
for the laser fan beam alignment reference only. The unit
is not a level and can not be used as a level. The laser
line generator is not designed as a height measuring
instrument and must not be used as such. It is designed
to be referred to its projected line only.
WARNING. Read and understand all instructions. Failure
to follow all instructions may result in hazardous radiation
exposure, electric shock, fire and/or bodily injury.
• Do not remove or deface any labels. Removing labels
increases the risk of exposure to laser radiation.
• Do not stare directly at the laser beam as serious eye
injury could result.
• Do not project the laser beam directly into the eyes of
others.
• Do not place the laser in a position which may cause
anyone to stare into the laser beam intentionally or
unintentionally.
• Do not use optical tools such as a telescope or transit
to view the laser beam.
• Do not operate the laser line generator around children
or allow children to operate the tool.
• Keep children and bystanders away while operating the
laser line generator.
• Turn the laser line generator off when it is not in use.
Leaving the laser on increases the risk of staring into
the laser beam.
• Do not operate the laser line generator in explosive
4
LASER RADIATION
IS EMITTED THROUGH
THIS APERTURE
LSLINE Deluxe Laser
Line Generator
Made in China N380
LASER LIGHT LASER RADIATION
Do not stare into beam.
Class 2 laser product.