Epson ARTISAN 725 - Manual (Page 35)

Replacing Ink Cartridges 35
Replacing Ink Cartridges
Make sure you have a new ink cartridge before you begin. You must install new
cartridges immediately after removing the old ones.
Caution:
Do not open ink cartridge packages until you are ready to install the ink. Cartridges are
vacuum packed to maintain reliability. Leave the expended cartridge(s) installed until
you have obtained a replacement, or the ink remaining in the print head nozzles may dry
out. If you remove a low or expended cartridge, you cannot reinstall and use it.
1. Turn on the product.
If a cartridge is low or expended, you see a
message on the display screen. Note which
cartridges need to be replaced and press
OK . If
you’re replacing an expended ink cartridge,
follow the instructions on the display screen.
(You cannot print until you have replaced any
expended ink cartridges.)
If you’re replacing a cartridge before it’s expended, follow the steps below.
2. Raise the scanner.