GPX TE1980B - Manual (Page 11)

Customer Support: 1-888-999-4215 11
Connecting Other Devices
You will need: a PC with a VGA output, and a VGA
cable. (not included)
1. Connect the computer’s VGA output to the VGA/
PC INPUT on the television.
2. Power the television on and press the SOURCE
button to switch to the PC Mode.
3. Audio from the connected PC can be input to the
television through the TV’s PC AUDIO INPUT by
using a 3.5mm audio cable (not included).
You will need: a (home theater) with
an Optical Audio Input and a Digital
Optical Audio Cable (not included)
1. Connect the Digital Optical Audio Cable to the
(home theater system) and the television.
2. Adjust the settings on your (home
theater) to play audio from the
connected Optical Audio Input.
Please note: home theater systems may label
the Optical Audio Input source differently,
such as “PCM”, or “Digital Audio Input”. Please
consult your home theater system’s user manual
in order to select the correct input source.
3. Audio from the television will now be played
through the connected (home theater system).
1. Load a USB thumb drive into the USB PORT as
shown in the image to the right.
1. Follow the instructions for Connecting a USB
thumb drive.
2. Press the SOURCE button to
switch to Media mode.
3. Use the ARROW and ENTER buttons to select
and play content from the connected USB
thumb drive.
4. Press the EXIT button to return to the media
menu.
The USB port can also be used to upgrade the
televisions firmware. For detailed instructions and
the latest software, go to www.gpx.com
(Computer, Optical Audio Output, and USB Thumb Drive)
OPTIC
AL OUT
OPTIC
AL OUT
OPTIC
AL OUT
Connecting a Computer
Using the Optical Audio Output
Connecting a USB Thumb Drive Using the Connected USB Thumb Drive
VGA/PC INPUT and PC AUDIO INPUT
OPTICAL AUDIO OUTPUT
USB PORT