Grizzly MOBILE PLANERS G0453 - Manual (Page 17)

-15- G0453/G0454 (Mfg. Since 3/08)
Inventory
Box Inventory: (figure 5) Qty
A. planer (not shown) .................................... 1
B. dust hood .................................................. 1
c. Foot pedal .................................................. 1
D. handwheel ................................................. 1
E. Caster ......................................................... 1
f. Extension Wings ........................................ 2
G0453 hardware and tools (not shown)
• set screws M8-1.25 x 20 (Wings) .............. 4
• hex Bolts M8-1.25 x 30 (Wings) ................. 6
• Flat Washers 8mm (Wings) ........................ 6
• lock Washers 8mm (Wings) ...................... 6
• handwheel Bushing ................................... 1
• handwheel handle ..................................... 1
• hex nut M12-1.75 (handwheel) .................. 1
• Flat Washer 12mm (handwheel) ................ 1
• hex Bolts M6-1 x 10 (dust hood) .............. 3
• Flat Washers 6mm (dust hood) ................. 6
• hex nuts M6-1 (dust hood) ....................... 3
• Cap screws M8-1.25 x 20 (dust hood) ...... 3
• hex Wrenches 2.5, 3, 4, 6mm ...........1 Each
• Wrenches 10/12, 14/17, 17/19mm ......1 Each
• Knife gauge ............................................... 1
figure 5. Model g0453/g0454 inventory.
B
C
d
E
F
G0454 hardware and tools (not shown)
•
set screws M8-1.25 x 20 (Wings) .............. 6
• hex Bolts M8-1.25 x 30 (Wings) ................. 6
• Flat Washers 8mm (Wings) ........................ 6
• lock Washers 8mm (Wings) ...................... 6
• handwheel Bushing ................................... 1
• handwheel handle ..................................... 1
• hex nut M12-1.75 (handwheel) .................. 1
• Flat Washer 12mm (handwheel) ................ 1
• Flange Bolts M6-1 x 12 (dust hood) .......... 6
• hex Wrenches 3, 4, 5, 6mm ..............1 Each
• Wrenches 8/10, 12/14, 17/19mm ........1 Each
• Knife gauge ............................................... 1
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.