Gold's Gym Platinum GGSY3058.0 - Manual (Page 23)

23
43. Attach the Seat (32) to the Seat Frame (8) with
two M6 x 20mm Screws (88), an M6 x 38mm
Screw (89), and an M6 Washer (114).
Insert the Seat Frame (8) into the Frame (9).
Tighten the Seat Adjustment Knob (52) into the
Frame and the Seat Frame.
Make sure that the
Adjustment Knob passes through one of the
holes in the Seat Frame.
44. Insert a Pad Tube (13) through the indicated hole
in the Front Leg (10). Slide a Foam Pad (36) onto
each end of the Pad Tube.
Press a Pad Cap (37) into an end of each Foam
Pad (36).
Repeat this step for the other Pad Tube (13)
and the Leg Lever (12). Note: Lift the Leg
Lever Cable (51) when inserting a Pad Tube
through through the hole in the bottom of the
Leg Lever.
43
89
32
52
88
9
8
44
13
13
51
12
36
37
36
37
42. Attach the Backrest (31) to the Backrest Frame
(7) with two M6 x 20mm Screws (88), an M6 x
38mm Screw (89), and an M6 Washer (114).
Insert the Backrest Frame (7) into the Upright (2)
and tighten the Backrest Adjustment Knob (53)
into the Upright.
Make sure that the Adjustment
Knob passes through one of the holes in the
Backrest Frame.
42
114
89
2
7
88
31
53
114
10