Document Outline

• Contents
  • Using Your EV730 Monitor 1
    • Safety, Regulatory, and Legal Information 23
      • Using Your EV730 Monitor
• Setting up the monitor
  • To attach the base:
    • 1 Carefully set the monitor on its side with the bottom of the monitor facing you.
      • 2 Hold the base so the rounded end is pointing toward the back of the monitor, then align the hoo...
      • 3 Slide the base toward the front of the monitor so all hooks are securely in place. The retainin...
      • 4 Carefully set the monitor upright and place it on a sturdy, level surface.
  • To connect the power and video cables:
    • 1 Position the monitor and your computer so you can easily get at the back panel of each. Make su...
      • 2 Connect the video cable to the matching (blue) video port on the back of your computer.
      • 3 Tighten the screws on the video cable connectors to keep them from coming loose. Tightening the...
      • 4 Connect the power cord that came with the monitor to the ACpower connector at the back of the ...
      • 5 Plug the other end of the power cord into a correctly grounded electrical outlet.
  • Removing the base
    • To remove the base:
      • 1 Turn off your computer, then disconnect the monitor’s power cable.
        • 2 Carefully set the monitor on its side with the bottom of the monitor facingyou.
        • 3 Rotate the base so you can easily get to the retaining latch on the bottom of the monitor, then...
        • 4 While pressing in the latch, slide the base toward the back of the monitor, then remove the base.
• Starting the monitor
  • To start the monitor:
    • 1 Press the power button. The power LED turns green, and the monitor demagnetizes itself for abou...
  • Left arrow
  • Caution
    • 2 Turn on your computer.
    • 3 After your computer is running, the powerLED on the monitor should be green. If not, check the...
    • 4 Adjust the controls to get the ideal image size and position for you. For more information, see...
• Adjusting monitor settings
  • To adjust the monitor settings:
    • 1 Press the Menu button. The OSD menu opens.
      • 2 Use the andbuttons to highlight a menu option.
      • 3 Press the Select button to select the highlighted menu option, then use the andbuttons to ad...
      • 4 Press the Select button to return to the Main menu.
      • 5 When you have finished making all adjustments, press the Menu button to exit the OSD.
  • OSD options
  • Software controls
    • Adjusting the color depth
      • To change the color depth:
        • 1 In WindowsXP, click Start, then click Control Panel. The Control Panel window opens. If your C...
          • 2 Click/Double-click the Display icon. The Display Properties dialog box opens.
          • 3 Click the Settings tab.
          • 4 Click the arrow button to open the Colorquality or Colors list, then click the color depth you...
          • 5 To save your changes in WindowsXP, click OK, then click Yes.
  • Help and Support
    • Adjusting the screen resolution
      • To change the screen resolution:
        • 1 In WindowsXP, click Start, then click Control Panel. The Control Panel window opens. If your C...
          • 2 Click/Double-click the Display icon. The Display Properties dialog box opens.
          • 3 Click the Settings tab.
          • 4 Drag the Screen resolution or Screen area slider to the size you prefer.
          • 5 To save your changes in WindowsXP, click OK, then click Yes.
  • Help and Support
• Power management
  • ENERGY STAR
  • Energy declaration
• Maintenance
  • Caution
• Troubleshooting
  • Important
    • No picture
      • Make sure that your computer is turned on.
      • Move the mouse or press any key on the keyboard to bring the monitor out of ActiveOff mode.
      • Restart your computer with the monitor turned on.
      • Make sure that the video cable is not damaged.
      • Check the video port and the end of the video cable for any pins that might be bent or pushed in.
    • Picture is scrambled
      • To reset the monitor settings:
        • 1 Restart your computer, then press and hold F8 while your computer is starting up.
          • 2 Select Safe Mode or Enable VGA Mode, then press Enter. Your computer restarts.
          • 3 In WindowsXP, click Start, then click Control Panel. If your Control Panel is in Category View...
          • 4 Click/Double-click the Display icon. The Display Properties dialog box opens.
          • 5 Click the Settings tab.
          • 6 Drag the Screen Resolution or Screen area slider to the size you prefer. If you are not sure wh...
          • 7 To save your changes in WindowsXP, click OK, then click Yes.
          • 8 If prompted, restart your computer.
    • Display colors are wrong
    • Picture is fuzzy
    • Picture bounces, jitters, or has waves
    • Picture has shadows or “ghosts”
    • Color is not uniform
    • Image is not sized or centered correctly
    • Image cannot be adjusted full screen
• Specifications
  • Safety, Regulatory, and Legal Information
  • Important safety information
    • Warning
• Setting up your system
• Care during use
  • Warning
• Replacement parts and accessories
  • Important
  • Regulatory compliance statements
    • United States of America
• Federal Communications Commission (FCC) Unintentional emitter per FCC Part15
• FCC declaration of conformity
  • Caution
    • Canada
• Industry Canada (IC) Unintentional emitter per ICES-003
  • EPA ENERGY STAR
  • California Proposition65 Warning
  • Warning
  • Notices
• All Rights Reserved
• Trademark Acknowledgments