Garmin GPSMAP 4000 - Manual (Page 11)

GPSMAP 4000 Series Owner’s Manual 
u
SInG
c
hartS
U
Sin
G
C
hart
S
Panning the Navigation Chart
Use the ROCKER on your GPSMAP 4000 series unit to move the map pointer ( ) away from
your current location and to scroll to other areas on the navigation chart. As you pan past the edge
of the current map display, the screen scrolls forward to provide continuous map coverage. The
position icon ( ) stays at your present location. If the position icon leaves the map when you pan, a
small window appears in the corner so you can keep track of your current position.
As you move the map pointer, its coordinates, distance, and bearing from your current location
appear in the upper-left corner of the map.
To pan the map, press up, down, right, or left on the ROCKER .
Map
pointer
Inset
map
Pan
options
Pointer distance
and bearing
from current
location
Pointer
coordinates
To stop panning, select Stop Panning from the options on the right.
As you pan the map, a list of options appear along the right side. These options change as you move
the map pointer over various objects and charts. To access an option, press the corresponding soft
key:
Review —( Review will not appear if the pointer is not near an object—if the pointer is near only one
object, the name of the object appears.) This allows you to view details of objects in the vicinity of
the pointer. When you select Review , you are presented with a list of all the objects near the pointer.
Navigate To —begin navigation to the pointer location.
Create Waypoint —mark a waypoint at the pointer location.
Information —view tide, current, celestial, or chart information near the pointer location.
•
•
•